Product Search
Search results for 'C-803'
Showing 21 - 41 of 563 Total Results
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
TM-2270
Location: Digital Load Indicating Systems
The new TM-2270 is an easy-to-use economical Digital Load Indicator loaded with features found in more expensive units.
CA-4008
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Case of 75.
Aqua-Check Kit, 20 gram capacity
SA-0255
Location: Moisture Testing
The Aqua-Check from Test Mark is a portable system used for measuring the moisture content of a wide range of materials including sand, aggregates and soil.
CA-3210
Location: Water/Cement Ratio
The Cementometer is used for rapid determination of the moisture content of fresh cement and concrete, available from Test Mark Industries.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
Automatic Loading Controlled Machines
(11) options
Location: Automatic Compression Testing Machines
Test Mark’s next generation closed-loop touchscreen controller features both full automatic and manual test control functions. Learn more.
Metric Individual Calibration Weights, NIST Traceable
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weights include an NIST Traceable Certificate. Weights are stainless steel construction, no adjusting cavity, with handling knob - Test Mark Industries.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
(2) options
Location: Rebar Locator
Test Mark's Rebarscope™ locates reinforcement bars in concrete and determines their depth and size.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
SA-0245
Location: Shear Vane Tester
The pocket shear vane tester from Test Mark provides a quick and efficient method for determining shear strength values of cohesionless values of soils.
CA-0358
Location: Self-Consolidating Concrete
The V-Funnel is used to measure flowability of fresh self-consolidating concrete. The funnel is filled and the time taken for it to flow through the apparatus is measured. A valve on the outflow port can be closed to allow SCC to settle, which indicates the tendency for segregation.
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
(3) options
Location: Triple Beam Balance
Triple Beam Balance features magnetic damping, three graduated-tier beams, larger more stable base, factory installed security built into base and positive poise positioning, all standard.
CA-2570-01
Location: Aggregate
Replacement abrasive charge for LA Abrasion Machine, consists of 12 hardened steel balls.
SA-4010
Location: Dynamic Cone Penetrometer
The Dual Mass DCP Standard Kit from Test Mark measures the shear strength of soil with a CBR between 0.5 - 100%.
Marshall Automatic Triple Compactor, 4" Rotating Mold
AA-0024
Location: Marshall Automatic Compactor
Automatically compacts three samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
